Furnace Blowing Cold Air? Furnace Repair in Sandy, UT

Furnace blowing cold air in Sandy? Here is what usually causes it, and when to call for furnace repair.

Why a Furnace Blows Cold Air in Sandy Homes

A furnace blowing cold air in Sandy usually means the blower is running but the burners are not. That can happen for a handful of reasons, and most of them need furnace repair.

Thermostat fan set to ON

If the fan is set to ON instead of AUTO, the blower runs between heating cycles and pushes room-temperature air. Switch it to AUTO first.

Dirty flame sensor or failed igniter

The burners light for a few seconds and drop out, or never light at all. The furnace locks out and the fan keeps blowing.

Overheating from a clogged filter

Dust from dry Utah summers loads filters quickly. Poor airflow trips the high-limit switch and shuts the burners off.

Blocked vent pipes after a snow

High-efficiency furnaces shut down when snow covers the intake or exhaust pipe outside.

Still getting cold air? Book furnace repair in Sandy or, if the house is getting cold, see our emergency furnace repair page.

Furnace Blowing Cold Air Questions in Sandy

Is a furnace blowing cold air dangerous?

Usually not by itself, but a furnace that keeps locking out can point to a venting problem. If a CO alarm sounds, get out and call 911.

Can I clean the flame sensor myself?

Some homeowners do, with the power off. If you are not comfortable inside the furnace, call us.

Furnace or AC Acting Up in Sandy?
Heating and cooling repair across the south valley.
Call (385) 614-7514